BC VIN SearchBritish Columbia

Buyer guide

How to inspect a used car before you buy

The record tells you what was reported; the inspection tells you the condition of the car in front of you. You need both — here's how to do the physical side well.

Last updated: September 2026

Start with the record, then inspect

An inspection is most useful when you already know where to look. Run a free VIN and recall check and, if the car's worth pursuing, a full history report first — then bring anything the record flags to the physical inspection. The two work together: the record points, the inspection confirms.

The walkaround (do this yourself, in daylight)

  • Paint and panels: look down the body in good light for colour mismatch, overspray, and uneven panel gaps — signs of accident repair.
  • Underneath: check for rust, fresh undercoating that might be hiding something, and any fluid leaks on the ground.
  • Tyres: uneven wear points to alignment or suspension issues; mismatched tyres suggest deferred maintenance.
  • Fluids: oil, coolant, and transmission fluid condition and level tell you how the car was cared for.
  • Interior: match the wear on the pedals, seat, and wheel against the odometer — a mismatch is a rollback warning.

The test drive

Drive it cold if you can — some problems only show on a cold start. Listen for knocks, whines, and clunks; test the brakes for pulling or vibration; check the steering for play; run the heating, air conditioning, and electronics; and keep an eye on the temperature gauge and any warning lights. A warning light that appears once the car warms up is worth investigating.

Get a professional pre-purchase inspection

Your walkaround narrows things down; an independent mechanic settles them. A pre-purchase inspection typically costs a fraction of the first hidden repair it can save you from, and a good shop will put the car on a hoist and check the frame, structure, and systems you can't see. Use an independent mechanic — not one the seller recommends — and treat any reluctance to allow it as a red flag in itself.

Where the inspection fits

The inspection is one step in a sequence. See how it sits alongside the record check, lien search, and paperwork in our before-you-buy checklist. Note that a voluntary pre-purchase inspection is different from the mandatory provincial inspection required for out-of-province vehicles.

Frequently asked questions

Should I get a pre-purchase inspection?
Yes. An independent mechanic's pre-purchase inspection typically costs far less than the first hidden repair it can help you avoid, and it catches accident repairs, frame damage, and mechanical problems a test drive won't. It's the single best money you'll spend before buying.
What should I check on a used car myself?
Do a walkaround in daylight: panel gaps and paint match, tyre wear, fluid condition and leaks, rust underneath, and interior wear against the odometer. On the test drive, listen for noises, check the brakes and steering, and watch the temperature gauge. Then let a professional confirm what you found.
Can I skip the inspection if the car has a clean history report?
No. A history report and a physical inspection check different things — the report shows reported records, the inspection shows the car's actual condition. A clean report doesn't reveal wear, neglect, or a poorly-done repair, so pair the two.
What are the biggest red flags during an inspection?
Mismatched paint and uneven panel gaps (accident repair), fresh undercoating hiding rust or damage, contaminated or low fluids, warning lights cleared just before viewing, and any reluctance from the seller to allow an independent inspection.